The 2700 series of Kanomax Gas Monitors can be configured with a wide range of single or multi-gas sensor heads. Each sensor head is simply plugged into the detector to begin monitoring. The detector does not require additional configuration allowing sensor heads to be swapped out easily in the field.
Increased sensitivity at a higher resolution is attained due to measurements being collected in ppb. Unit comes with a self calibration zero-out feature. The monitor is compatible with a full range of gas sensors. The optional remote sensor head adapter kit allows the sensor head to be located up to 46 ft. away.
More Information
Navigate the tab section below to see this product’s Features & Benefits, Specifications, Resources, and more.
- Features on-board alarm, data logging, software interface, and an analog output
- The basic monitor will display minimum, maximum and average readings and is designed for short term indoor measurements
- Measures a wide range of common indoor air pollutants
- Interchangeable sensor heads capable of measuring more than 20 types of toxic gases, and one that can measure particles
- Accurate and reliable measurements
- Alarm and analog output available
- Can be configured with a wide range of single or multi-gas sensor heads.
- Each sensor head is simply plugged into the detector to begin monitoring.
- The detector does not require additional configuration allowing sensor heads to be swapped out easily in the field.
- Sensor heads come with a NIST TRACEABLE CALIBRATION certificate.
- Increased sensitivity at a higher resolution is attained due to measurements being collected in ppb.
- Unit comes with a self calibration zero-out feature.
- The monitor is compatible with a full range of gas sensors.
- The optional remote sensor head adapter kit allows the sensor head to be located up to 46 ft. away.
- IAQ Investigation
- Industrial Hygiene Quality Control
- Occupational Safety and Health Testing
- US GBC LEED certification
| Main Unit Specifications | |
|---|---|
| Measurement Units | PPM or mg/m3 |
| Sensor Head | Removable and Replaceable |
| Output | 0 to 5 V, Alarm output |
| Data Logging | 8188 data points |
| Power Supply | Li-Ion Battery or AC Adapter |
| Dimensions (with sensor head) | 7.0 x 4.75 x 2.0 inches (195 x 122 x 54 mm) |
| Weight (with sensor and battery) | 1 lbs (460 g) |
| Standards | CE-mark Part 15 of FCC Rules EN 50082-1: 1997 EN 50081-1: 1992 |
| Warranty | 1 year |
| What's Included | Meter, Li-ion battery pack, Operation manual, AC adapter, PC connection cable, Data processing software |
| Gas Monitor Sensor Heads | ||||||
|---|---|---|---|---|---|---|
| Sensor | Range (PPM) | Accuracy of Calibration | Min. Detection Limit (PPM) | Resolution (PPM) | Operational Temperature Range | Operational RH Range |
| Ammonia | 0-100 | <±10% | 0.2 | 0.1 | 32-104°F | 10-90% |
| Ammonia (leak) | 0-1000 | <±15% | 2 | 1 | 32-104°F | 10-90% |
| Carbon Monoxide | 0-25 | <±0.5 ppm 0-5 ppm; | 0.05 | 0.01 | 32-104°F | 10-90% |
| <±10% 5-25 ppm | ||||||
| Carbon Monoxide | 0-100 | <±1 ppm 0-10 ppm; | 0.2 | 0.1 | 32-104°F | 10-90% |
| <±10% 10-100 ppm | ||||||
| Carbon Monoxide | 0-1000 | <±10 | 1 | 1 | 32-104°F | 10-90% |
| Carbon Dioxide | 0-2000 | <±10 ppm +5% | 10 | 1 | 32-104°F | 10-90% |
| Carbon Dioxide | 0-5000 | <±20 ppm +5% | 20 | 1 | 32-104°F | 10-90% |
| Chlorine | 0-10 | <±10% | 0.02 | 0.01 | 32-104°F | 10-90% |
| Formaldehyde | 0-10 | <±0.05 ppm 0-0.5 ppm; | 0.01 | 0.01 | 32-104°F | 10-90% |
| <±10% 0.5-10 ppm | ||||||
| Hydrogen | 0-5000 | <±10 | 5 | 1 | 32-104°F | 10-90% |
| Hydrogen Sulfide | 0-10 | <±0.05 ppm 0-0.5 ppm; | 0.04 | 0.01 | 32-104°F | 10-90% |
| <±10% 0.5-10 ppm | ||||||
| Hydrogen Sulfide | 0-100 | <±0.5 ppm 0-5 ppm; | 0.04 | 0.01 | 32-104°F | 10-90% |
| <±10% 5-100 ppm | ||||||
| Methane | 0-10000 | <±15% | 10 | 1 | 32-104°F | 10-90% |
| Nitrogen Dioxide | 0-1 | <±0.02 ppm 0-0.2 ppm; | 0.005 | 0.001 | 32-104°F | 10-90% |
| <±10% 0.2-1 ppm | ||||||
| Ozone | 0-0.15 | <±0.005 ppm | 0.001 | 0.001 | 32-104°F | 10-90% |
| Ozone | 0-0.5 | <±0.008 ppm 0-0.1 ppm; | 0.001 | 0.001 | 32-104°F | 10-90% |
| <±10% 0.1-0.5 ppm | ||||||
| Ozone | 0-10 | <±0.1 ppm 0-1 ppm; | 0.02 | 0.01 | 32-104°F | 10-90% |
| 15% 1-10 ppm | ||||||
| Perchloroethylene | 0-200 | <±5 ppm 0-50 ppm; | 1 | 1 | 32-104°F | 10-90% |
| <±10% 50-200 ppm | ||||||
| Sulphur Dioxide | 0-10 | <±0.05 ppm 0-0.5 ppm; | 0.04 | 0.01 | 32-104°F | 10-90% |
| <±10% 0.5-10 ppm | ||||||
| Sulphur Dioxide | 0-100 | <±0.5 ppm 0-5 ppm; | 0.4 | 0.1 | 32-104°F | 10-90% |
| <±10% 5-100 ppm | ||||||
| VOC (GSS sensor) | 0-25 | <±10% | 0.1 | 0.1 | 32-104°F | 10-90% |
| VOC (GSS sensor) | 0-500 | <±10% | 1 | 1 | 32-104°F | 10-90% |
| VOC (GSS sensor) | 0-20 | <±10% | 0.02 | 0.01 | 32-104°F | 10-90% |
| VOC (GSS sensor) | 0-1000 | <±10% | 0.2 | 0.1 | 32-104°F | 10-90% |
| Temperature | -20-100°C | <± 0.3°C | 0.01°C | -40-248°F | 0-105% | |
| Humidity | 0 to 100% | <± 2% RH | 1% RH | -40-248°F | 0-105% | |
| Gas Monitor Laser Particle Sensor Head | ||||||
|---|---|---|---|---|---|---|
| Sensor Type | Range (mg/m3) | Accuracy of Calibration | Min. Detection Limit (mg/m3) | Resolution (mg/m3) | Operational Temperature Range | Operational RH Range |
| LPC | 0.001-1.000 | ±0.005 mg/m3 +15% | 0.001 | 0.001 | 0-40°C | 0-90% |
User Manual
Data Sheet - English
Data Sheet - Espanol
Data Sheet - Gas Sensor Heads List
Application Note - Indoor Sterilization and Purification
Application Note - OZONE Monitor Pharmaceutical Applications
Software
- Gas Monitor Gas Sensor Head 1 - 21 Gases
- Gas Monitor Gas Sensor Head 2 - 4 Gases
- Gas Monitor Mountable Industrial Enclosure: Model KM ENC CASE
- Gas Monitor Remote Sensor Kit: Model KM R10
- Gas Monitor AC Adapter: Model KM R18
- Gas Monitor AC Car Adapter: Model KM R32
- Gas Monitor Wall Bracket: Model KM R33
- Gas Monitor Li-ion Battery: Model KM R36
- Gas Monitor Carrying Case: Model KM R40
- Gas Monitor Calibration Kit: Model KM R42
Kanomax Gasmaster Handheld Gas Monitor - Overview
Our portable gas detectors are designed for easy and affordable measurement of indoor and industrial air quality.
They are used by health and safety experts at industrial and commercial sites as well as researchers who are interested in measuring hot spots and testing personal exposure to harmful indoor gases.
Our sales representatives are here to help you find the right instrument for your application. Fast.
Request a quote today to find the product you need with expert assistance.
